text.skipToContent text.skipToNavigation

Enable Accessibility |

You're Shopping:

Alpharetta GA #172

PVC-Lock 90 Degree Elbow 3/4 in. PVCL

Patent Pending Push-and-Go Design-100% tool and chemical free approach that cuts installation time in half or more.
Patent Pending Retaining System-Stainless steel teeth grip pipe tight for a strong, leak-proof connection.
Swivels on the Pipe

Not Available Online in Your Area

Check Other Stores

Description

Patent Pending Push-and-Go Design-100% tool and chemical free approach that cuts installation time in half or more.
Patent Pending Retaining System-Stainless steel teeth grip pipe tight for a strong, leak-proof connection.
Swivels on the Pipe

PVC-Lock by Hydro-Rain is a remarkable push-fit fitting for repairing or installing PVC piped sprinkler systems without toxic glues or primers. Each PVC-Lock fitting contains a stainless steel retainer ring and an O-ring seal, preventing leaking at both low and abnormally high pressures. Using PVC-Lock fittings allows you to lose the glue and reduces traditional installation times by over 50%. With PVC-Lock you'll leave your project with clean hands and a clear conscience knowing that your installation crew and the environment are being protected from harmful chemicals.

Calculate by measurements or square feet? Measurements Square Feet

What are the dimensions of your area?

Length feet

Width feet

Side feet

Diameter feet

Side A feet

Side B feet

Height feet

How many square feet?

Area square feet

How deep do you want your fill?

Depth feet

Include an extra 10% for waste or extra

Calculated Sub Total:

cubic yards

10% Extra:

cubic yards

Total:

cubic yards

Rounds To:

cubic yards

Area:

square feet

Weight:

CUBIC YARDS

TOTAL

Description

PVC-Lock 90 Degree Elbow 3/4 in. PVCL. PVC-Lock by Hydro-Rain is a remarkable push-fit fitting for repairing or installing PVC piped sprinkler systems without toxic glues or primers. Each PVC-Lock fitting contains a stainless steel retainer ring and an O-ring seal, preventing leaking at both low and abnormally high pressures. Using PVC-Lock fittings allows you to lose the glue and reduces traditional installation times by over 50%. With PVC-Lock you'll leave your project with clean hands and a clear conscience knowing that your installation crew and the environment are being protected from harmful chemicals.

People who viewed items you browsed also viewed

Help us improve our product information.

Specifications

Suggest an edit

Pvcl

Elbow

90-Degree

PVC-Lock Series

ABS Plastic

3/4 in.

0.20 lb.

Blue, White

90 Degree

150 PSI

68 F

3/4 in.

Pvcl

Hydro-Rain

Information and Guides

Product Information Sheet

Use of this site is subject to certain Terms and Conditions.
Local branch prices may vary from those displayed and inventory levels cannot be guaranteed.

PVC-Lock 90 Degree Elbow 3/4 in. PVCL

Bulk Material Calculator

People who viewed items you browsed also viewed

Recently Viewed Items